天堂网www,免费追剧大全在线观看电视剧,97久久精品无码一区二区欧美人 ,日本丰满少妇高潮呻吟

無源醫療器械設計開發期間，設計驗證是非常重要的一部分。做設計驗證之前，首先問自己一個問題:為什么要做設計驗證？

圖1 – 將設計控制應用于瀑布設計過程

資料來源：FDA 《DESIGN CONTROL GUIDANCE FOR MEDICAL DEVICE MANUFACTURERS》（所用的圖得到加拿大衛生部醫療器械局的許可）

1.什么是設計驗證？

首先，我們要知道什么是設計驗證：

設計驗證：證實設計和開發輸出滿足輸入的要求。即設計驗證是在每個階段檢查輸出是否符合該階段要求的過程。

例如：設計輸入是否已被轉換為一種可以被充分驗證的形式？器械實際尺寸是否與圖紙相符？產品包裝是否保護器械免受任何存儲和運輸?shù)牟焕绊懀科餍凳欠衲褪芩x擇的滅菌方法？所選擇的滅菌方法是否能保證產品無菌？等等。

2. 設計驗證的法規標準要求

其次，從法規標準的角度，看一下各國市場法規標準中對于設計驗證要求的來源：

NMPA國內市場

1.《GB/T 42061-2022 醫療器械 質量管理體系用于法規的要求》

7.3.6設計和開發驗證

為確保設計和開發輸出滿足設計和開發輸入的要求，應依據所策劃并形成文件的安排對設計和開發進行驗證。

組織應將驗證計劃形成文件，驗證計劃包括方法、接收準則，適當時包括包含樣本量原理的統計技術。

如果預期用途要求醫療器械連接至或通過接口連接至其他的一個或多個醫療器械，驗證應包括證實當這樣連接或通過接口連接時設計輸出滿足設計輸入的要求。

應保留驗證結果和結論及必要措施的記錄（見4.2.4和4.2.5）

2.《醫療器械生產質量管理規范》

第三十四條　企業應當對設計和開發進行驗證，以確保設計和開發輸出滿足輸入的要求，并保持驗證結果和任何必要措施的記錄。

CE市場

1.《ISO 13485:2016》

7.3.6 Design and development verification

Design and development verification shall be performed in accordance with planned and documented arrangements to ensure that the design and development outputs have met the design and development input requirements.

The organization shall document verification plans that include methods, acceptance criteria and, as appropriate, statistical techniques with rationale for sample size.

If the intended use requires that the medical device be connected to, or have an interface with, other medical device(s), verification shall include confirmation that the design outputs meet design inputs when so connected or interfaced.

Records of the results and conclusions of the verification and necessary actions shall be maintained (see 4.2.4 and 4.2.5).

2. MDR REGULATION (EU) 2017/745

6. PRODUCT VERIFICATION AND VALIDATION 

The documentation shall contain the results and critical analyses of all verifications and validation tests and/or studies undertaken to demonstrate conformity of the device with the requirements of this Regulation and in particular the applicable general safety and performance requirements. 

(a)results of tests, such as engineering, laboratory, simulated use and animal tests, and evaluation of published literature applicable to the device, taking into account its intended purpose, or to similar devices, regarding the pre-clinical safety of the device and its conformity with the specifications;

(b) detailed information regarding test design, complete test or study protocols, methods of data analysis, in addition to data summaries and test conclusions regarding in particular

(c) the clinical evaluation report and its updates and the clinical evaluation plan referred to in Article 61(12) and Part A of Annex XIV;

(d)the PMCF plan and PMCF evaluation report referred to in Part B of Annex XIV or a justification why a PMCF is not applicable.

FDA市場

《QSR 820.30》

(f) Design verification. Each manufacturer shall establish and maintain procedures for verifying the device design . Design verification shall confirm that the design output meets the design input requirements.  The results of the design verification, including identification of the design, method(s), the date, and the individual(s) performing the verification , shall be documented in the DHF.

《QSR 820.250》 

(a) Where appropriate, each manufacturer shall establish and maintain procedures for identifying valid statistical techniques required for establishing, controlling, and verifying the acceptability of process capability and product characteristics .

(b) Sampling plans, when used, shall be written and based on a valid statistical rationale. Each manufacturer shall establish and maintain procedures to ensure that sampling methods are adequate for their intended use and to ensure that when changes occur the sampling plans are reviewed. These activities shall be documented. 

3. 設計驗證的目的

設計驗證的目的是提供客觀證據以證明你的設計要求已經滿足，如果設計要求沒有滿足，則需要表明設計離達到要求還有多遠。設計驗證確保在進入設計確認之前是經過驗證的設計。

4. 設計驗證的重要性

在設計開發過程的早期（如定義設計輸入時）就應該考慮設計驗證。

設計驗證是所有注冊申報的一個重要因素，監管機構將尋找客觀證據，以判定你的醫療器械符合安全性和有效性的基本要求。